Cinestill D6 DaylightChrome 1st Developer Bath, to mix 2000ml
Cinestill D6 DaylightChrome 1st Developer Bath, to mix 2000ml
Hinta 17,99 €
- Saatavuus
- Varastossa
D6 “DaylightChrome” Neutral-tone 5500K 1st Developer is one of the developers of the Cs6 “Creative Slide” 3-Bath Process. It renders approximately 6+ stops of usable dynamic range, with brighter whites and moderately enhanced color saturation, just like conventional E6 processing. Daylight-balanced 5500K for neutral-tone slides in daylight or with electronic flash.
1000ml stock solution makes 2000ml of single-use working solution (1+1 dilution) to develop up to 16 rolls or 100ft of slide film.
Intended to be used with the Cr6 "Color&Reversal" 2-in-1 Slide Solution and the Bf6 "Bleaches&Fixer" 3-in-1 Slide Solution for the full 3-bath Cs6 process.
Toimituskulut
- Nouto PhotoStellan myymälästä Tampereelta
- 0,00 €
- Posti Postipaketti
- 7,99 €
- Lähetys toimitetaan pakettiautomaattiin tai Postin palvelupisteeseen. Saat saapumisilmoituksen nopeasti tekstiviestinä kun paketti on noudettavissa.
- Matkahuolto Lähellä-paketti
- 7,99 €
- Matkahuollon Lähellä-paketti kulkee luotettavasti kotimaassa Keskon, R-kioskin ja Matkahuollon omiin noutopisteisiin. Kaikkiaan Matkahuollolla on Suomessa lähes 2000 noutopistettä keskeisillä paikoilla.
- Posti Kotipaketti (yksityisille)
- 19,99 €
- Toimitetaan suoraan vastaanottajan ovelle vastaanottajan kanssa sovittuna ajankohtana.
Tilauksesi tuotteet voidaan toimittaa seuraavilla toimitustavoilla.
Linkki enlanninkieliseen käyttöohjeeseen tässä.
Linkki englanninkieliseen turvallisuusohjeeseen tässä.
FEATURES:
Daylight-balanced 5500K for neutral-tone slides in daylight or with electronic flash
1000ml stock solution makes 2000ml of working solution (diluted 1+1 with water)
Single-use solution has a capacity of 8-16 rolls (135/120), 32-64 sheets (4x5), or 100 feet (35mm) of film
Approximately 6+ stops of usable dynamic-range*, just like conventional E-6 processing
Vibrant color rendering
Low D-min for brighter whites and clean highlights
Push process using dilutions and development times with variable temperatures
Image archivability for at least 80 years
Easily mixed liquid concentrate
MIXING STOCK SOLUTION:
Place 16oz (470ml) of water into a clean glass or plastic pitcher.
Use a clean plastic stir stick or the TCS-1000 to circulate the liquid.
While circulating, add the contents of this bottle.
Top off solution with water to make 1000ml. Mix well.
Store mixed solution in a tightly capped, completely filled storage container for 2-6 weeks. Yellows with age and turns amber when perished. Oxygen and contaminants cause developing agents to perish.
Normal Development: 1+1 Dilution ~ 6min @104°f (40°C)
Push +1: Stock Solution ~ 6min or 1+1 Dilution ~ 8min
Push +2: Stock Solution ~ 8min
Maintaining temperature is not essential beyond pouring in the 1st developer. When a temperature control bath is not available, simply preheat the 1st Developer +2ºF warmer, and the other baths will automatically process-to-completion as they cool down. Only the 1st developer is time and temperature critical because it controls contrast and color.
* ”Usable dynamic-range” is the amount of full stops of exposure value that renders acceptable detail and color. “Total dynamic-range” however, is the maximum range containing tonal separation rendering any detail, and is often twice the usable dynamic-range. The usable dynamic-range of conventional slide film is between 6-8 stops (total 14-16 stops). Color negative is between 9-13 stops (total 16-21 stops). Digital sensors are mostly between 7-10 stops (total 12-15 stops).