Cinestill Bf6 ''Bleaches&Fixer'', to mix 1000 ml
Cinestill Bf6 ''Bleaches&Fixer'', to mix 1000 ml
Hinta 21,99 €
- Saatavuus
- Varastossa
Intended to be used with the D6, T6, or D9 1st Developers and the Cr6 "Color&Reversal" 2-in-1 Slide Solution.
The Cs6 "Creative Slide" 3-Bath Process makes complicated chemistry simplified alchemy!
The number of processing baths for E6 film is reduced from 6 to 3. The reversal step occurs during color development in a Color&Reversal bath, and the bleach and conditioner steps are combined with the fixing step in a Bleaches&Fixer bath. Color-timing is performed with alternative 1st Developers to achieve full creative control of your slides.
Toimituskulut
- Nouto PhotoStellan myymälästä Tampereelta
- 0,00 €
- Posti Postipaketti
- 7,90 €
- Lähetys toimitetaan pakettiautomaattiin tai Postin palvelupisteeseen. Saat saapumisilmoituksen nopeasti tekstiviestinä kun paketti on noudettavissa.
- Matkahuolto Lähellä-paketti
- 7,90 €
- Matkahuollon Lähellä-paketti kulkee luotettavasti kotimaassa Keskon, R-kioskin ja Matkahuollon omiin noutopisteisiin. Kaikkiaan Matkahuollolla on Suomessa lähes 2000 noutopistettä keskeisillä paikoilla.
- Posti Kotipaketti (yksityisille)
- 19,90 €
- Toimitetaan suoraan vastaanottajan ovelle vastaanottajan kanssa sovittuna ajankohtana.
Tilauksesi tuotteet voidaan toimittaa seuraavilla toimitustavoilla.
Linkki englanninkieliseen käyttöohjeeseen tässä.
Linkki englanninkieliseen turvallisuusohjeeseen tässä.
FEATURES:
3-in-1 conditioner, bleach and fixer bath
Reusable solution capacity of 24-36 rolls (135/120), 96+ sheets (4x5), or 200 feet (35mm) of film
Flexible temperature range of 75 -104°f (23-40°C)
6min process time is minimum for completion
Low D-min for brighter whites and clean highlights
Image archivability for at least 80 years
Easily mixed 3-part liquid concentrate
MIXING STOCK SOLUTION:
Place 14 oz. (414 ml) of 140ºF (60ºC) water into a clean glass or plastic pitcher.
Use a clean plastic stir stick or the TCS-1000 to circulate the liquid.
While circulating, add the contents of the bottle marked "PART A".
Continue circulating, add the contents of the bottle marked "PART B".
Continue circulating, add the contents of the bottle marked "PART C".
Store mixed solution in a tightly capped storage container with air inside for 2-4 months. Aerate frequently. Oxidation encourages activity of bleaches. When film wont clear after 10 min retire chemistry and re-fix film.
Bleaches&Fixer Bath: Stock > 6-10min @ 75 -104°f (23-40°C)
This is a process-to-completion step. Time is minimum for completion.
Maintaining temperature is not essential beyond pouring in the 1st developer. When a temperature control bath is not available, simply preheat the 1st Developer +2ºF warmer, and the other baths will automatically process-to-completion as they cool down. Only the 1st developer is time and temperature critical because it controls contrast and color.